Uniden G24 Series Owner'S Manual Download Page 22

Page: 22 / 64

Main Screen

Sub Screens

what it does

Network Setup

Internet Setup

Select the type of internet connection to

be used. (DHCP is most common.)

Security Code

Set a security code for remote access.

Network Information

Displays information about your network

and the Monitor’s unique DID number.

Alarm Setup

Period

Set a length of time for the alarm to

sound.

Melody

Select a melody to play for the alarm.

System Setup

Power Saving

Temporarily turns off the LCD after the

system is idle for 2 minutes to conserve

power.

Screen Auto Lock

Locks the screen from further activity

until the screen is unlocked.

Time

Clock Alarm. Set an alarm.
Time Setting. Set the current time.
Timer. Time countdown.

Storage Management

• Formats/erases all the data on the

microSD card.

•

Permits new records to overwrite old

records when the microSD card is full.

System Upgrade

Upgrades the Monitor firmware.

Language

Changes default language setting for

the Monitor (English, French or Span-

ish).

Quick Tips

Provides a list of 10 common questions.

Summary of Contents for G24 Series

































































Search results

Summary of Contents for G24 Series

Reviews:

Related manuals for G24 Series

Brands by name

Popular brands

Uniden G24 Series, Owner'S Manual

Search results

Summary of Contents for G24 Series

Reviews:

Related manuals for G24 Series

Brands by name

Popular brands