background image

3. Next, press 

skip

or 

repeat

until you hear the correct hour setting. (Numbers 1

through 12 display on the base as each hour is announced.) Press 

clock

again to

select the correct time.

4. Press 

skip

or 

repeat

until you hear the correct time setting. (Numbers 0 through

59 display on the base as each minute is announced.) Press 

clock

again to select

the correct time.

5. The LED displays an A or P. Press 

skip

or 

repeat

until you hear the correct

AM/PM setting.

6. Press 

clock

again to end the time/day setting. The EXS 9995 announces the time

that you have set.

43

SETTING YOUR GREETING

If you don’t set the clock within two minutes, the system returns 
to standby.

When you receive a call, the answering system plays either a prerecorded greeting or
a personal/user recorded greeting.

Prerecorded Greeting

The following message is prerecorded:

“Hello, no one is available to take your call. Please leave a message after the tone.”

Recording your Personal/User Greeting

Press “

msg line select

” to select 

line 1

or 

line 2

.

The selected line LED lights.

1. Press and hold 

greeting

until you hear a long tone. Start recording your

message immediately after you hear the long tone end.

2. When you finish recording your message,

press 

play/stop

. A long tone sounds and

your message plays back on the phone.
You can cancel play back by pressing the

play/stop

key again.

You can record a greeting up
to 30 seconds for each line.

EXS9995  11/9/00  15:55  Page 43

Summary of Contents for EXS 9995





























































Reviews: