Uniden EXS 9995 Owner'S Manual Download

Page: 20 / 60

Use the

redial

key to recall the last 3 numbers dialed.

The redialed number can be up to 32 digits long.

To redial from the handset:

Press

redial

repeatedly to display the number

you want to dial, then press

line 1

Or, press

line 1

before redial, only the last

number dialed can be accessed for redial.

After you’ve selected a line, if you press any number on the keypad, redial is no
longer available.

USING REDIAL

PLACING A CALL ON HOLD

The EXS 9995 has last three
Number Redial memories.
The redial memory is
common to both lines.

When the base is powered by
the spare battery, the

hold

key (base) is disabled.

Use either the keypad on the handset or the keypad on the base.

1. To place

line 1

on hold at the base,

press

hold

. The

line 1

LED turns from

green to red.

2. To place

line 1

on hold at the handset,

press

call id/hold

The following screen appears:

3. To pick up the call that is holding,

press

line 1

on the base or handset.

<Hold>

Line 1

EXS9995 11/9/00 15:54 Page 18

Summary of Contents for EXS 9995





























































Search results

Summary of Contents for EXS 9995

Reviews:

Related manuals for EXS 9995

Brands by name

Popular brands

Uniden EXS 9995, Owner'S Manual

Search results

Summary of Contents for EXS 9995

Reviews:

Related manuals for EXS 9995

Brands by name

Popular brands