manualshive.com logo in svg

Uniden EXS 9995, Owner'S Manual

Share
Download
Uniden EXS 9995 Owner'S Manual Download Page 51

▼

Deleting individual message

Press “

msg line select

” to select 

line 1

or 

line 2

.

The selected line LED lights.

1. Press 

play/stop

to review your message.

2. If you decide to delete a message, press

delete

anytime during the message. The

system beeps and immediately goes to the
next message.

3. After you have played all of your messages, 

a long tone sounds on the base speaker.

▼

Deleting all messages

Press “

msg line select

” to select 

line 1

or 

line 2

. The selected line LED lights. Press

and hold 

delete

after reviewing your messages. A tone sounds when all messages are

deleted. New messages will not be deleted until they have been reviewed.

49

When you press 

delete

, you

are permanently deleting the
message, Once deleted, the
message cannot be replayed.

The voice memo function is
completely independent of
the outgoing message. It’s
handy for leaving others a
quick message.

A voice memo message will
be stored as a typical
recorded message on the
selected line.

DELETING A MESSAGE

VOICE MEMO

Press “

msg line select

” to select 

line 1

or 

line 2

.

The selected line LED lights.
The voice memo function allows the user to record a message (up to 10 minutes) on
the base.

1. Press and hold 

voice memo

, until you

hear a long beep. The selected line
message counter LED count up from 
1 to 60 (for 10 minutes).

2. Speak into the microphone.

3. When you have finished, press 

voice

memo

or 

play/stop

to stop recording.

The system returns to standby.

4. To play voice memo, press 

play/stop

.

A voice memo recording
automatically stops when
you receive a call or page.

EXS9995  11/9/00  15:55  Page 49

Summary of Contents for EXS 9995





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands