61
Traveling Out of Range
During a call, if you move your handset too far from your base, noise may increase. If you pass the range limit of the
base, the handset will beep, display OUT OF RANGE, and then go to standby. The base will maintain the connection
for 30 seconds after the handset goes out of range. If you move the handset back within range of the base within 30
seconds, press
[ / flash]
or
[ ]
to pick up the call again.
Common Issues
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve
your problem, please call our Customer Hotline (see back cover page).
Symptom Suggestion
The charge LED won't
illuminate when the handset is
placed in the cradle.
•
Make sure the AC adapter is plugged into the base or the charger (if you
have more than one handset) and wall outlet.
•
Make sure the handset is properly seated in the cradle.
•
Make sure the charging contacts on the handset are clean.
The audio sounds weak.
•
Move the handset and/or base away from metal objects or appliances and try
again.
•
Make sure that you are not too far from the base.
Can't make or receive calls.
•
Make sure that you are not too far from the base.
•
Make sure the line is not in use. If an outside call is already using a line, you
cannot use that line to make another outside call.
•
Check both ends of the base telephone line cord.
•
Make sure the AC adapter is plugged into the base and wall outlet.
•
Disconnect the AC adapter and reconnect.
•
Change the Digital Security Code (see
Changing the Digital Security Code
on page 60).
