Uniden DCT70585 Series Owner'S Manual Download Page 51

Page: 51 / 76

Activating the Message Alert

The message alert feature sounds a short alert tone every 15 seconds whenever you have a new message. To turn
on the message alert:

From the base

From the handset

1. Press

[menu/clock]

five times. The current setting (ON

or OFF) appears on the base and it is announced.

2. Press

[

/select]

[

/select]

to choose ON or OFF.

3. Press

[set]

. A confirmation tone sounds, and the system

announces the new setting. When the first new message
is received, the alert tone will begin to sound.

1. Press

[menu/clear]

. Select the ANSW.

SETUP menu, and then the MESSAGE
ALERT submenu.

2. Move the cursor to select ON or OFF.

3. Press

[select/

]

. You will hear a

confirmation tone.

Activating Call Screening

Your phone allows you to listen to callers leaving you a message. This call screen feature can be turned on or off.

From the base

From the handset

1. Press

[menu/clock]

seven times. The current call screen

setting (ON or OFF) appears on the base.

2. Press

[

/select]

[

/select]

to choose ON or OFF.

3. Press

[set]

. A confirmation tone sounds, and the system

announces the new setting.

1. Press

[menu/clear]

. Select the ANSW.

SETUP menu and then the CALL
SCREEN submenu.

2. Move the cursor to select ON or OFF.

3. Press

[select/

]

. You will hear a

confirmation tone.

Summary of Contents for DCT70585 Series













































































Search results

Summary of Contents for DCT70585 Series

Reviews:

Related manuals for DCT70585 Series

Brands by name

Popular brands

Uniden DCT70585 Series, Owner'S Manual

Search results

Summary of Contents for DCT70585 Series

Reviews:

Related manuals for DCT70585 Series

Brands by name

Popular brands