Prima IP KVM Switch User Guide R1.4
4.10
LAN TCP/IP – Port and IP settings
After any setting change, click the
Submit
button to save new setting to the Prima IP database, and then
click
Apply Setting
to apply new settings to Prima IP immediately.
TCP/IP Settings
TCP Port base : Specify the port base for viewer connection with the
Prima IP
server. You can
choose any available port setting starting form the lowest port base alternative of 5900 with an
increment of 10 right up to port 6090. The port base you choose is exactly the port number that
Prima IP
uses for viewer connection and “port base + 8” is the exact port number used by
secure http connection of the browser connection. After you have made the port base
modification, remember to hit the
Submit
button, and then hit the
Apply Setting
button (found
on the
Apply Settings
page) to reboot
Prima IP
.
Host Name :
S
pecify the host name for
Prima IP
as appears within your Local Area Network.
Domain Name (Leave empty if unknown) : Specify the domain name for your
Prima IP
host.
IP Address: Enter a fixed IP address that will be used by
Prima IP
in your local area network.
Network Mask: Enter the correct subnet mask for your local network.
Gateway: Enter the correct IP for your gateway.
Primary DNS Server: Enter the primary DNS Server for
Prima IP
. This is a required setting for
the e-mail alerts function in
Prima IP
.
If you are hosting multiple
Prima IP
units within your networking environment and you want to allow
external internet access to these multiple
Prima IP
units by using only an external IP together with a set of
dedicated port numbers each for a different
Prima IP
unit ….. then, one usual practice is to configure a set
of virtual servers on your router so as to map each
external access_IP: port_number
pair to an
internal IP:
- -
65
