Prima IP KVM Switch User Guide R1.4
Connection Info (Win32 viewer)
New connection
Make another new connection by the viewer.
Save connection options
Save the connection options settings such as those connection parameters specified within the
Connection Options
Box and also the password within the registry of the client computer.
By selecting this option, you can save your session password as well as other connection
parameters in the registry of your client computer, so that next time when you log in the viewer
for a new session, you will not be prompted for session password again. However the client path
phrase required in the connection of Level 3 security (
256-bit SSL encryption
and
PKI
Authentication
) will not be saved and will be asked for every time when you login under Level 3
security setting.
Screen Refresh
Force updating of the viewer screen output
Full Screen
Change the viewer screen to Full Screen mode (
Only the Win32 Viewer supports this Full Screen
option
).
Send Ctrl-Alt-Del
Send a
Log On (Log Off)
key sequence to the remote end.
Scanning
Start scanning through computers by issuing a programmable port switching commands with a
delay time to a conventional KVM Switch behind
Prima IP.
Computer Power Off
Send a Power Off serial port command to the remote power control unit (Only SUPERADMIN or
ADMIN is allowed).
Computer Power On
Send a
Power On
serial port command to the remote power unit (Only SUPERADMIN or ADMIN is
allowed)
- -
42
