Prima IP KVM Switch User Guide R1.4
Figure 2-3 The Combo-free USB PS/2 KVM cable
Figure 2-4 The Daisy-chain Cable [M-HDB15-to-HDB15-F]
Figure 2-5 The [Daisy-chain] Terminator
2.2
Set up the Physical Connections
Step 1. Power on the Prima IP: Connect the
Prima IP
Power adapter to power on the Prima
IP KVM Switch.
Step 2. Set up a local console on Prima IP: If a local console (that is a physical keyboard,
mouse and monitor connected to the Prima IP) is required, connect a keyboard and mouse to
the
Prima IP
local console ports (that is keyboard, mouse and monitor port specifically).
Step 3. Connect to Computers: If you have no intention to daisy-chain your Prima IP KVM
switch with either of the Prima KVM switches (Prima 4/Prima 8/Prima 16). You just connect each
PC port to a computer, using the USB KVM cable, or PS/2 KVM cable, or the Combo-free USB
PS/2 KVM cable that come with the Prima IP packing box.
If you are using any PS/2 computer: Please make sure all of your PS/2 computers are
powered off before connecting to the KVM Switch. Otherwise, the non-PnP PS/2 interfaces
might not recognize the PS/2 keyboard and mouse later. However, USB computers do not have
this limitation.
- -
12
