36
KLEv2
Static Device Management
You can manage static devices by clicking on the
Static Devices
button in the
Devices
panel or in the
Devices
menu. The pop-up window below shows the list of configured static
devices. Click the corresponding options to add, modify or suppress an existing device.
You can specify a static device by entering its host name or dot-decimal IP address.
Note:
1. In case of remote device, located over the Internet for example, take care to specify a
public IP address or host name (i.e. the Internet address) and not the LAN IP address set
up in the device web management.
2. You can transform a Dynamic Device into Static Device by entering its LAN IP address, or
simply by selecting it in the device list.
If you want to receive centralized reports for radius accounting logs, check the
Enable
Radius Accounting Log
box. Enter the Radius Port number and the Radius Secret as
configured in the specific device management.
Note:
When you check the
Enable Radius Accounting Log
selection, the device is
automatically added to the
Radius Client
list. Refer to the following section.
