35
KLEv2
Report Lists
■ Keep Only the Most Recent:
When this option is selected, you can set up the number of
most recent messages that will be displayed in the report lists.
■ Clear the Report Lists at Program Exit:
When this option is selected, all report lists are
cleared when the program terminates. Otherwise, the lists are kept and restored at next
start.
■ Automatically Save the Deleted Report Contents:
Save the messages that are deleted
because at least one of the two previous options are selected. Refer to section Report
Panel to know the file name of report lists. Note that the lists cleared by clicking the Clear
buttons are not concerned by this option.
Debug Logs
By default, KCenter program sends messages resulting from unattended events to the
Java console. You can control the types and destination of these messages by ticking the
following options.
■ Display Full Debug Information in the Console Log:
When this option is selected, KCenter
will send more detailed information to the Java console.
■ Redirect Console Log Contents to Disk:
The message will not send to the Java console if
this option is selected. The file will be re-located to “USER_HOME\.KCenter \Debug”
folder.
Note:
It’s not suggested to enable these options except the request from technical support.
