manualshive.com logo in svg

UniCarriers 1F1, Operator'S Manual

The UniCarriers 1F1 Operator's Manual is available for free download on our website. This comprehensive manual provides essential guidance and instructions for operating and maintaining the UniCarriers 1F1 with ease. Enhance your experience with this user-friendly manual available at manualshive.com.

Share
Download
background image

115

WARNING

!

•  Do not attempt to replace the LPG Cylinder (tank) with the 

holder in the open position. Replace the LPG Cylinder (tank) 
only with the holder locked in place.

8.  Pull down on the strap latch and open fully to release the cylinder 

(tank).

9.  Securely grasp the cylinder (tank) with both hands and lift the 

cylinder (tank) up to remove it from the holder and gently place on 
the ground.

WARNING

!

•  When the latch pin is pulled out from the cylinder (tank) 

holder, the weight of the holder and the LPG Cylinder (tank) 
cause the holder to drop naturally, possibly resulting in 
unexpected injury.

•  When swinging the cylinder (tank) holder, be sure to support 

the cylinder (tank) until the swing is completed. If you release 
the cylinder (tank) before it is locked in position, it may move 
in the opposite direction, or it may swing rapidly causing 
unexpected injury.

•  When handling the LPG Cylinder (tank), be sure to grasp 

it at the top and bottom. If you grasp any other part of the 
cylinder (tank), there is the danger that your hands may be 
caught between the cylinder (tank) and the holder.

Installing Cylinder (Tank) Swing-Out Type

1.  Turn the LPG Cylinder (tank) so that the side with the locator hole 

for the locator pin on the bracket are lined up. Securely grasp the 
cylinder (tank) with both hands and lift the cylinder (tank) up and 
place on holder.

WARNING

!

•  Do not place your feet directly below the LPG Cylinder (tank). 

The cylinder (tank) is heavy and there is the danger of injury 
if it falls. When handling the LPG Cylinder (tank), be sure to 
grasp it at the top and bottom. If you grasp any other part of 
the cylinder (tank), there is the danger that your hands may 
be caught between the cylinder (tank) and the holder.

2.  Hook the strap latch to secure the cylinder (tank) in place.

WARNING

!

•  Check that the LPG Cylinder (tank) is securely clamped in 

place. Check that there is no looseness in the cylinder (tank) 
or strap.

•  If the cylinder (tank) is not securely fastened, the cylinder 

(tank) may fall, causing unexpected injury.

3.  Connect the high pressure hose threaded connector, turn clockwise 

until tight.

WARNING

!

•  Connect the high pressure hose to the cylinder (tank) taking 

care not to twist the hose.

Summary of Contents for 1F1























































































































































































































Reviews:

No comments

Related manuals for 1F1

Hercules LT0892 Instruction Manual preview
LT0892
Brand: Hercules Pages: 17
ep CQD12R Operation Manual preview
CQD12R
Brand: ep Pages: 45
Linde T 16 Operating Instructions Manual preview
T 16
Brand: Linde Pages: 53
Linde E 20-02 Operating Instructions Manual preview
E 20-02
Brand: Linde Pages: 96
Linde T20 AP Service Training preview
T20 AP
Brand: Linde Pages: 134
Linde 335-03 Series Original Instructions Manual preview
335-03 Series
Brand: Linde Pages: 140

Brands by name

Popular brands

Load more brands