UniCarriers 1F1 Operator'S Manual Download | Manualshive

Page: 100 / 214

background image

98

HYDRAULIC OIL LEVEL

1. Check the oil level in the hydraulic oil tank.

NOTE:

For correctly checking
the hydraulic oil level,
park the lift truck on level
ground and stand the mast
vertically with the forks
lowered to their lowest limit
beforehand.

2. Visually check for oil leakage.
3. Remove the hydraulic oil filler cap located on the right side of the

operator's seat.

4. Wipe down the level gauge with a clean cloth and reinsert the level

gauge into the hydraulic oil filler and pull it out again.

5. Make sure that the fluid level is within the proper range.
6. If fluid is insufficient, refill with the specified fluid so that the level

gauge reads the proper range.

REFILLING HYDRAULIC OIL

Remove the hydraulic oil filler cap. While checking the hydraulic oil level
with the level gauge, pour the specified hydraulic oil into the oil filler until
the oil level is in the proper area (refer to page 128).

CAUTION

!

• Do not use any hydraulic oil other than those specified by

the OEM, otherwise it may cause not only deterioration in the
performance of the lift truck but could result in an accident.

• Carefully add the hydraulic oil so as not to mix dust and

foreign substances in the oil.

STEERING WHEEL PLAY

Turn the steering wheel to the left and
right. A play in the circumference of less
than 30 mm (1.18 in) at idling is normal.

WARNING

!

• If there is excessive play or looseness, have the steering

wheel adjusted by your Local Authorized Dealer.

Proper

area

Free play

«
...
98
99
100
101
102
...
»

Summary of Contents for 1F1























































































































































































































Reviews:

No comments

Related manuals for 1F1

Brand: Manitou Pages: 246

Brand: kleenconnect Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands