UniCarriers 1F1 Operator'S Manual Download | Manualshive

Page: 85 / 214

background image

83

Lock lever

TOP PANEL

WARNING

!

• Do not open the top panel (hood) with the engine running. Do

not place hands near the cooling fan because it rotates at a
high speed and may cause injury. When starting the engine,
check the top panel (hood) to make sure that it is locked.

The lift truck is provided with a top panel lock to ensure that the engine
hood cannot be opened unless the lock is released.

The top panel opens towards the rear of the lift truck and is retained by
a gas stay.

OPEN OPERATION

1. Tilt the steering wheel all the way forward and upward. Use the

service release latch lever (yellow) (refer to page 84).

2. For LPG and Dual Fuel lift trucks with swing out or swing down

LPG Cylinder (tank) mounting, you must swing out the LPG Cylinder
(tank) before opening the top panel (refer to page 86).
For lift trucks equipped with the optional joystick, before the top
panel is opened you must tilt the joystick control unit.

3. Pull the lever on the left side of the operator's seat upward to tilt the

backrest forward.

4. Pull up on the lock lever in the front left side of the top panel to

unlock it while pressing down, then lift the panel rearward.

NOTE:

For opening, refer to the top panel open procedure label on the body.

«
...
83
84
85
86
87
...
»

Summary of Contents for 1F1























































































































































































































Reviews:

No comments

Related manuals for 1F1

Brand: Gradall Pages: 327

Brand: Jungheinrich Pages: 53

Stack-N-Go FPS2500-90NAS

Brand: Southworth Pages: 37

Brand: Still Pages: 98

Brand: Hyster Pages: 26

Brand: Hyster Pages: 22

Brand: Hyster Pages: 20

Brand: Hyster Pages: 28

Brand: Hyster Pages: 40

Brand: Hyster Pages: 29

Brand: Hyster Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands