Unical M 3000 S, Installation And Servicing Instructions

Page: 25 / 36

25
Instruction for the installer
Sub parameter Name Factory Value Description
Regolafacile setting
00 At 10 5 ÷ 20 Min. difference between boiler temp. and exit temp. from M3000 S
01 BC 1 1 ÷ 13 Identification code of the SLAVE module
02 dL 25 20 ÷ 45 Minimum exit temperature
03 dH 50 50 ÷ 85 Maximum exit temperature
04 ES 3 0 Without outer Timer
1 With outer Timer
2 Without outer TA ON-OFF
3 With outer TA ON-OFF
07 Hn 0 1 ÷ 13 None SLAVE module connected
08 AF 0 1 ÷ 15 Boiler antifast time:
min. time between a switch OFF and the subsequent switch ON
09 HL 35 35 ÷ 50 Boiler minimum temperature
10 HH 85 55 ÷ 85 Maximum boiler temperature (changes the value in the boiler)
3.13 - PREADJUSTED
REGULATION PARAMETERS
Pre-adjusted parameters on the module M 3000 S
It is possible to modify these parameters throu-
gh the room thermostat REGOLAFACILE
1
CORREZIONE MANUALE DI TEMPERATURA
0
SE
TROPPO
FREDDO
REGOLA FACILE
attiva solo con riscaldamento in funzione
2 3
SE
TROPPO
CALDO
24
18 6
12
RESET
OK
Once the modification of the TSP parameters
is completed, the REGOLAFACILE can be re-
moved from M 3000 S.
In case of installation with more thermal
modules it is necessary to modify some
parameters
- Open the shutter of the REGOLAFACILE
- Push the button up to find the menu TECNICO
- Push (the first parameter of the list is displaied):
(HEATING CURVE)
- Push the button up to find the parameter 20
- Introduce the access codeo (1234) using the buttons 1-
2 / 1 e 2-2 / 1 e 2-2-2 / 1 e 2-2-2-2
- Push to confirm
- Push the button up to reach the parameter TSP
OK
OK
PARAMETER
PRE-SET
VALUE
SUB-
PARAMETER
SUB
PARAMETER
NAME
CORRESPONDANCE
=
At
=
BC
=
dL
=
dH
=
ES
=
Hn
=
AF
=
HL
=
HH
- Push the button to display the first sub-parameter
00 of TSP
OK
- Push the button : the symbol is displaied,
Select the desired value with the push buttons
; then push to confirm.
- Select the subsequent bub-parameter to be modified,
with the push buttons
OK
!
OK