UNIA HERMES 3.0, Manual

Page: 8 / 23

8
For transporting the machine mounted on the tractor, it is necessary:

Raise the machine using the hydraulic lift of the tractor three- point linkage (hitch)
so that the clearance under the machine is min 25 cm

Lock the hydraulic control lever in the tractor

Secure the three- point linkage (hitch) with the chain to avoid lowering the
machine

Stiffen the lower links of the tractor so that the machine does not swing
sideways
In addition, when driving with the seeder raised on the lift (coupling), HERMES power
harrow should be:
- place the seeder on the properly adjusted supports (see par. 9.6) and interlock the lift
/coupling/ (see par. 11), in order to prevent the seeder from falling while driving
- travelling with seed material in the seed box is forbidden
Adjust the driving speed to road conditions, however, do not exceed 20 km/h. Driving and
gear shifting can negatively affect the tractor lowering and lifting mechanism and the
machine mounted on it. That’s why you should always leave enough room for manoeuvre
and control the gears.
CAUTION !
It is forbidden to carry passengers or materials on the machine.
When driving with seeder mounted on HERMES 3.0 power cultivator unit on highways,
observe also the rules of transport specified for the transported seeder.
DIAGRAM OF THE HYDRAULIC SYSTEM
cultivator unit + seeder
• seeder equipped with hydraulic marker triggner
• the tractor has four outputs for controlling the external hydraulics
Tractor hydraulics
Input/Output
Lift cylinder
Trigger cylinder
Cultivator unit
Seed drill