30
Table 3-1 Descriptions of Basic Functions (continued)
Function key
Access key
Descriptions
[Edit oflower
line
ź
]
[Edit
ź
]
Soft menu for the edit of lower line pops up.
Ǐ
PEAK
ǐ
——
Move frequency marker at the peak of track,
and soft menu related with frequency marker
function pops up.
[Max.valuesearch]
Ǐ
PEAK
ǐ
Move frequency marker at the peak of track.
[Next peak]
Ǐ
PEAK
ǐ
Move active frequency marker to next highest
peak of track related with position of current
frequency marker.
[Left peak]
Ǐ
PEAK
ǐ
Move frequency marker to the peak on the left
of current frequency marker.
[Right peak]
Ǐ
PEAK
ǐ
Move frequency marker to the peak on the
right of current frequency marker.
[Frequency
marke
Uĺ
center
frequency]
Ǐ
PEAK
ǐ
Set peak frequency marker moving to center
frequency.
[Min.valuesearch]
Ǐ
PEAK
ǐ
Look up min. amplitude value on the trace,
and mark it by marker.
[Peak search]
On Off
Ǐ
PEAK
ǐ
Enable or disable signal tracking function,
frequency marker always tracks max. value
of current trace.
Ǐ
SPAN
ǐ
——
Activate frequency span, set spectrum
analyzer in center frequency span mode, and
soft menu for the setting of span pops up.
[Span]
Ǐ
SPAN
ǐ
Activate frequency span function, set
spectrum analyzer in center frequency span
mode.
[Full span]
Ǐ
SPAN
ǐ
Set spectrum analyzer’s span value as
maximum value.
[Zero span]
Ǐ
SPAN
ǐ
Set span as 0Hz, this function displays input
signal in amplitude-time mode, so it is very
helpful to observe modulated signal.
[Previous span]
Ǐ
SPAN
ǐ
Set spectrum analyzer’s span value as
previous span value.
Ǐ
SYS
ǐ
——
Soft menu about system setting pops up.
[System
information
ź
]
Ǐ
SYS
ǐ
Open soft menu of system information and
system log.
[System
information]
[System
information
ź
]
Open relevant parameters concerning system
information.
[System log]
[System
information
ź
]
Open system log to view system revision
records.
[Local
language
ź
]
Ǐ
SYS
ǐ
Enter soft menu of language setting.
[Chinese]
[Local
language
ź
]
System is displayed in Chinese.
[English]
[Local
language
ź
]
System is displayed in English.
[Date/time
ź
]
Ǐ
SYS
ǐ
Enter soft menu of date and time setting.
[Date setting]
[Date/time
ź
]
Set system date.
[Time setting]
[Date/time
ź
]
Set system time.
[Local network
ź
]
Ǐ
SYS
ǐ
Open soft menu for the setting of local
network parameters.
[IP address]
[Local network
ź
]
Set host computer’s IP address.
[Subnet mask]
[Local network
ź
]
Set subnet mask parameters.
[Gateway]
[Local network
ź
]
Set gateway parameters.
87623(5$7,1*0$18$/
Summary of Contents for UTS1000 Series
Page 1: ......
Page 89: ...86 876 23 5 7 1 0 18 ...
