Quality Tools for Smart Cleaning
Operation of the HydroPower RO
Switching off the HydroPower RO
www.ungerglobal.com
24
5.7
Switching off the HydroPower RO
When the HydroPower RO is switched off, a self-cleaning process starts. For 1 minute, 100% of the
incoming water flows with increased pressure through the RO membrane 1 and the RO membrane 2 and
is discharged through the concentrate hose at the rear.
To switch off the HydroPower RO after finishing the work,
proceed as follows:
1. Turn the on / off knob to the red position.
`
The automatic self-cleaning process starts, which
rinses the residues from the membrane. This operation
lasts approx. 1 minute, do not interrupt it.
2. Three displays appear in an automatic sequence.
3. Switch off the main switch and disconnect the
HydroPower RO from the water supply and the power
supply.
3
The HydroPower RO is switched off and can be
transported.
