4.
Press the “locking” tabs at the rear corners of the panel and slide
the it a few inches toward the rear of the computer. If the panel lid
appears tight, apply a strong downwards pressure (where the large
arrows indicate) as you slide the lid to the rear. Then lift t he
panel up and off the computer.
5.
Remove the metal access port cover behind the enhanced PCI slot
marked Slot A. (The marking is on the motherboard.)
Remove the mounting screw at the top of the metal access port
cover, then lift off the cover plate and set it aside.
6.
Position the E100 card over Slot A.
Slot A