Introduction
Congratulations on your purchase of the SuperMac E100 Extended
Performance Card by UMAX Computer Corporation (referred to herein
as UMAX Computer). The SuperMac E100 combines high speed disk
and networking capabilities in a single PCI card. It dramatically
increases performance of most SCSI devices connected to it and con-
nects your SuperMac system to a high-speed 100Mbps network.
The E100 offers up to 40MByte per second transfer rates and enables
you to daisy-chain up to 16 devices. The E100 provides automatic ter-
mination with custom termination available through the control panel.
The 100MBit Ethernet feature offers instant migration from 10 to
100Mbps networking, auto-negotiation for 10Base-T or 100Base-TX
operation, and a performance gain of four or five times over ordinary
10Base-T when combined with NetDoubler software. The E100 card
improves network throughput by taking full advantage of network
bandwidth.
Registration
Please take a moment and fill out the warranty registration card which
is included with your SuperMac E100 Extended Performance Card.
This process enables us to learn more about you so that we can better
serve our customers. This reply card requires no postage if mailed
within the United States.
About This Guide
This manual will guide you through the installation and use of the
E100 hardware and software. This manual contains the following
chapters:
Chapter 1, Installing the E100,
provides step-by-step instructions for
installing the E100 Extended Performance Card.
Chapter 2, Connecting Ultra SCSI,
explains how to connect the Ultra SCSI
feature provided by your E100.
Chapter 3, Using the Ultra SCSI Software
trol panel software for your E100.