Configuring the AppleTalk Control Panel
You complete your network connection by configuring the AppleTalk
control panel.
1.
Choose Control Panels from the Apple menu.
2.
Select AppleTalk from the Controls Panels submenu.
The AppleTalk control panel appears.
3.
From the “Connect Via” drop-down list, choose “Ethernet Slot For
E100.”
4.
Click the close box to close the AppleTalk control panel.
A dialog box appears asking whether you want to save your
changes.
5.
Click Save.
Note: To verify the Ethernet connection, select Chooser from the Apple
menu. You should see network devices in the Chooser. If you do not see
network device in the Chooser, check to see that at least one of the
other network devices is powered on before assuming that’s a problem
with your Ethernet connection.