10.
While pressing down on the panel with one hand, slide the panel
toward the front with the other.
11.
Tighten the thumb-screw on the back panel.
12.
If you are installing the card in an S900, carefully return the
computer to its vertical position.
Installing the E100 Software
Your E100 card requires special software which is contained on the
CD-ROM included with your E100 card.
Before you install the E100 software, temporarily disable any virus
protection software.
To install the E100 software, follow these steps:
1.
Place the CD disc that contains system software in the CD-ROM
drive’s tray with the label facing up, and close the tray.
2.
Double-click the Install E100 Software to open the installer.
3.
In the Welcome dialog box that appears, click OK.
4.
Check that the disk named in the box is the one on which you want
to install the E100 software.
If not, click the Switch Disk button until the correct disk name
appears.
5.
In the Installer dialog box, choose Easy Install.