To make a drive connected to the E100 card the startup drive when no
existing drive is used for startup:
1.
Connect the drive you plan to use for startup to the E100 card.
2.
Start up from the SuperMac system software CD-ROM provided
with your system.
3.
Through the Startup Disk Control Panel, select the disk connect to
the E100, then shut down.
4.
Connect any other devices to the E100 card.
Note: For specific instructions on how to connect your drives, including how to
properly set SCSI IDs, refer to the documentation enclosed with the drives.
5.
Start up your SuperMac computer. It will now start up from the
desired device.