22
ULVAC CRYOGENICS INCORPORATED
(*)Refer to UW701N instruction manual for the detail of allowable range of cooling
water.
6.3.3
Connection of Nitrogen gas tube
Place Nitrogen gas tube from the bottom hole and connect it to the gas connector
of the nitrogen gas pressure regulator. Connect the other side to the nitrogen
gas supply valve of customers’ preparation.
6.3.4
Connection of nitrogen gas generator remote cable
Connect the nitrogen gas generator remote cable to the remote connector located
inside the MP-300K, and the signal connector on the back of the GN-20i.
Attach the MP-300K back panel when all the connections are completed.
CAUTION
Water may leak if the connection between cooling water joint and hose is loose.
CAUTION
Be sure to connect the hose to the correct port. Wrong connection may result in
breakage of cooling water tube and leakage of water.
