‐
05
‐
0.4 Acceptance and Store of Product
0.4.1 Acceptance of Product
We delivered the pump with the utmost care. After unpacking, please check up
and confirm items as shown below，
(1)
The pump is what you ordered.
(2)
Spare parts (single use of pump oil, optional parts)
(3)
Any damages during transportation.
(4)
Any loose screws and nuts.
If you find any abnormal circumstances, please contact your local ULVAC
KIKO,Inc. Sales or Service Center.
0.4.2 Store of Product, Installation, Operating condition
This pump is a type of precision equipment; therefore, it is necessary to
satisfy the following items for store product.
(1)
Operational temperature and humidity : 7～40°C , 85 % RH >
(2)
Installation place should be at an altitude no higher than 1000m above sea
levels for storing or operation.
(3)
Required conditions while storing or operating
a.
Do not use corrosive or explosive gases.
b.
No areas with high moisture.
c.
No areas with dust particles.
d.
Use indoors only.
e.
Do not pile up, or lay on its side.
f.
Keep out of direct sun light.
g.
Keep away from heat source.
Do not treat with force, or lay on its side. It may cause damage.
