No.10100‑2‑02‑2
Safety
-3
Section Ⅵ‑ Precautions for Safe Handling and use
Steps to Be Taken in Case Material is Released or Spilled
Eliminate ignition sources.
Remove free liquid into an empty container. Use suitable absorbents for the un‑recovered
fluid.
In case of a large amount of leak or spill, lead the flow of the liquid to a safety
place by means of banking with sand or any other appropriate materials. Then recover
it.
Waste Disposal Method
Dispose the waste according to federal, state and local regulations.
Precautions to Be Taken in Handling and Storing
Use with adequate ventilation.
Wear safety gloves and glasses.
Store indoors and close tightly with cap.
Keep the storage temperature in the range from 0℃ to 40℃.
Keep away from heat, open flame, sparks and other possible ignition sources.
Prevent accumulation of static electricity.
Keep away from halogens, strong acids, alkaline agents and oxidizing agents, and do
not store the product in the same place.
Other Precautions
Avoid contact with eyes, skin and clothing.
Section Ⅶ‑ Control Measures
Respiratory Protection (Specific Type)
Not normally required.
Ventilation Local
Exhaust
Not normally required.
Special
None
Mechanical
(General)
Recommended.
Other
None
Protective Gloves
Rubber
Eye Protection
Goggles
Other Protective Clothing or Equipment
None
Work/ Hygienic Practices
Wash hands thoroughly after handling.
