12
4) Removing the Holder Plate, Cup Packing, and Inlet Valve Rubber Separator
(1) Mark the holder plate at the mark on the casing.
(2) Loosen the four countersunk M5xL12 screws in the holder plate. While wearing gloves,
hold the loosened connecting rod and loosen the four countersunk screws.
(3) Remove the holder plate.
(4) Remove the cup packing.
(5) Removal is now complete.
(1)
Mark the holder plate.
(2)
Loosen countersunk screws.
(3)
Remove the holder plate.
(4)
Remove cup packing.
(5)
Removal complete.
