02
Checks When Opening Packaging
Check the following after opening the packaging.
(1) Is the product as you requested?
(2) Are the accessories and necessary parts included?
Standard accessories
・
Instruction manual
-------------------- x 1
・
Inlet pipe protective cap and vent plug
-------------------- x 1 each
・
Silencer
-------------------- x 1
(3) Is the pump damaged in any way?
(4) Are any external screws or inlet and outlet pipes loose? Are any components missing?
Contact your agent or the sales division of the manufacturer if there are any problems with the
pump.
1. Ensure that the tube on the side of the pump is not gripped or bent when removing
the pump from the packaging. Holding the pump by this tube may damage it, thus
reducing pump performance.
2. Always remove the vent plug before using the pump.
3. Fit an inlet filter if there is a possibility of foreign matter or dust particles entering the
pump.
4. Use ventilation holes, and fit a cooling fan, to reduce the temperature in the vicinity of
the pump. Ensure that the pump cooling fan inlet is not blocked. Ensure that a space
of at least 100mm is available on all sides of the pump.
DOP-300S
DOP-300SV
!
Note
