13
5) Removing Small Cylinder Components
(1) Loosen the outlet valve holder plate
M3xL5 roundhead screw.
(2) Remove the outlet valve holder plate,
backup outlet valve, and outlet valve.
(3) Loosen the inlet valve holder plate M3xL5
roundhead screw.
(4) Remove the inlet valve holder plate and
inlet valve.
(5) Place a small amount of cleaning fluid on
a soft cloth or paper and wipe the entire
cylinder to remove oil and grease. It is
particularly important to clean the inlet
and outlet valve mountings, and the inside
surface of the cylinder.
Caution: Take care to ensure that the
mark is not lost.
(6) Cylinder list
a: Inlet valve (DOP-50S4,50S4V,50S4
Ⅱ
,50S4V
Ⅱ : One piece t=0.2 )
b: Outlet valve c: Backup outlet valve d: Backup inlet valve
(1), (2)
Loosen and remove screw.
(3), (4)
Loosen and remove screw.
ａ
ｂ
ｃ
ｄ
