Uludag G-250, Manual For Introduction, Operation And Maintenance

Page: 19 / 66

17
2. MACHINE’S DESCRIPTION AND TECHNICAL SPECIFICATIONS
2.1. Machine’s Prescribed Objective of Use
This machine is designed for professional use.
The machine is designed and manufactured
only for cutting wooden materials and
profiles*. It is used for cutting wooden material blocks with square and rectangle cross-
section.
The use other than the above mentioned cutting operations are not allowed and failures
which will likely happen to machine and the damages to the user and the products will
not be included in the manufacturer's warranty enclosure.
*
It can be used for aluminum, PVC profile and soft-alloy metals with proper cutting tools
The machine is not designed for cutting hard-alloy materials like steel, etc.
2.2. Service Life
The service life of the machine is at least 10 years under the conditions of proper use
and regular maintenance.
2.3. Disposal of the Machine
At the end of the service life, the machine can be disposed normally by the collection and
recycling central of industrial waste materials.
2.4. General Safety Instructions
•
Your machine must be fixed and secured to a place against unintended and
unauthorized access.
•
Electric installation and the equipments (earthed power socket) which will
supply power to machine must comply with the relevant standards and valid
rules in force by the authorized organizations.
•
Do not attempt to use the machine before securing the work in-between clamp
jaws.
•
Do not inactivate or remove the safety equipments like safeguards, emergency
stop etc. on the machine.
•
Wearing saggy, over-size garments, and use of personal adornments are
dangerous for the operator.
•
During operation, use protective goggles against spattering chips and sawdust
and earplugs for noise wherever necessary.