Uludag G-250, Manual For Introduction, Operation And Maintenance

Page: 22 / 66

20
NO PART NAME NO PART NAME NO PART NAME
1 FOOT 24 LOCK THIN PLATE 47 M6-25 BAKALITE SCREW
2 TURNING TABLE 25 SIDE LOCK PIN 48 M6-15 BAKALITE GRIP
3 RIGHT GUARD 26 LOCK SUPPORT 49 Ø9 SHAFT RETAINER
4
LEFT GUARD
(TILTING/VERTICAL)
27
Ø16 UPPER TABLE BEARING
SHAFT
50
M6-20 PHILLIPS –ROUND HEAD
SCREW
5 T-FLANGE 28 Ø10 STOP ROD 51 M8–25 HEX.-SOCKET SCREW
6 BEARING FORK 29 Ø20 CLAMP BUSHING 52 M6-25 CAP SCREW
7
ELEC. MOTOR
CONNECTION PART
30 M12 CLAMP SCREW 53 M8–35 HEX.-SOCKET SCREW
8 UPPER TABLE 31 CAST FLANGE 54 M12–35 HEX.-SOCKET SCREW
9 UPPER SET SQUARE 32 30-32 SAW BLADE HOLDER 55 M8–20 HEX.-SOCKET SCREW
10
SWIVEL-HEAD CLAMP
BEARING
33 M8 STEPPED WASHER 56
M6-30 PHILLIPS –ROUND HEAD
SCREW
11 CLAMP HANDLE 34 OUTER NUT WASHER 57 M6-35 SETSCREW
12 TIGHTENING JAW 35 BEARING 6007 Z 58 M6-40 SETSCREW
13 FIXING JAW 36 BEARING 51110 59 M12-15 SETSCREW
14 SIDE EXTENSION CLAMP 37 BEARING 51105 60 M6 NUT
15 GRIP 38 ELECTRIC MOTOR 61 M16-1.5 NUT
16 GRADE-LOCK PIN 39 RUBBER 62 Ø6 WASHER
17 GRADE-LOCK BEARING 40 UPPER BLADE GUARD 63 M12 WASHER
18 GRADE PIN 41 PLASTIC HANDLE 64 M8 WASHER
19 M12 STUD 42 SWITCH
20 SPRING BEARING SHAFT 43 M6-35 LOCKING HANDLE
21 BEARING PLATE 44 M8 BAKALITE GRIP
22 Ø20 BEARING SHAFT 45 M6-30 BAKALITE SCREW
23 LOCKING HANDLE 46 M6-15 BAKALITE SCREW
3. INSTALLATION
All of our machines are throughly tested in the factory and delivered after ensuring all final
checks. Besides that, all of the standard and optional accessories specified on the
enclosed documents must be checked whether they are existing or not.
3.1. Hoisting
Because of the machine is relatively small and light, it could be readily lifted up and
transported either at least by two people who are holding it at sides in a well-balanced
way or by a standard handling truck. Always pay attention to the warning remarks on the
package for transport and storing of the machine. While transporting with trucks or the
like vehicles, make sure that the package is completely secured against discharge.