21
Step 11
Align the right door (15) hinge with the mating hinge on the sidewall. Align the
door hinge pin holes with the hinge pin holes in the sidewall. Slide the hinge pin
tube (17) into the aligned holes (Note: It may be necessary to move the door and
tap the hinge pin tube with a hammer until the hinge pin tube is fully seated all
the way through the hinge holes.) Repeat this step for the remaining right door
(15) and to the remaining left doors (16).
Step 12
Tighten the bottom two threaded rods (2) by turning the interior wall nut
assembly (1) from the outer wall and by holding the interior wall nut assembly
(1) on the inner wall from turning. These thread rods will be tightened until the
hinged doors are eveningly gapped about ½”. Then tighten the four jam nuts (3)
to the interior wall nut assemblies (1).
