20
Step 9
Insert hex head bolt(6) with the washer (4) through the interior wall and roofs.
(Do not insert a hex bolt (6) on the outer interior wall unit, until the next unit is
added on.) Place a 3/8” washer (4) and a locknut (5) on the end of the bolt.
Tighten bolt securely to draw the sidewall and roof together (there should not be
a gap between the roof and sidewall in this area). Wipe off or smooth out any
sealant that may have squeezed out of the seams.
Step 10
Place the top edge of the roll top door (18) into the notches of the sidewalls.
(The door may need to be bowed slightly to place the edges into the notches.)
Then push the door up into the track, until the entire door is in the track. Once
the roll door (18) is in the track slide it down to its closed position. Repeat this
step for the opposite side.
