24
Step 17
Insert hex head bolts(6 &13) with the washers (4) through the walls and roof.
Place a 3/8” washer (4) and a locknut (5) on the end of the bolt. Tighten bolts
securely to draw the sidewalls and roof together (there should not be a gap
between the roof and walls in this area). Wipe off or smooth out any sealant
that may have squeezed out of the seams. Note: Hex head bolt (13) goes on the
end wall.
Step 18
Place the top edge of the roll top door (18) into the notches of the sidewalls.
(The door may need to be bowed slightly to place the edges into the notches.)
Then push the door up into the track, until the entire door is in the track. Once
the roll door (18) is in the track slide it down to its closed position. Repeat this
step for the opposite side.
