Ultrak CRX-501, Installation And Operation Manual

Page: 9 / 65

1-1
SECTION 1. INTRODUCTION
1.1 GENERAL
The Model CRX-500 Series Control Receivers are microprocessor-based
receivers for driving conventional pan and tilt units. These units are ideal for
CCTV surveillance systems having multiple cameras, multiple monitors, and
multiple control stations. These units allow a system to have a mixture of
conventional pan and tilt devices and Diamond Electronics FastScan/SmartScan
units. It may also be used as a single digital control system using one
transmitter and one receiver.
The Control Receiver performs the following functions in response to data sent
from a Diamond Electronics controller such as the Model CTX-800 Control
Transmitter, JAD-832 Joystick Controller or JPD-100 Series Joystick Controllers.
• Pan left/right
•
Tilt up/down
•
Zoom in/out
•
Focus near/far
•
Auxiliary equipment control (lights, gates, etc.) on/off