2-20
2.7.1
RS-422 Communication Connections.
The CRX-500 Series Control Receivers can receive control data from
any of Diamond Electronics control equipment that outputs RS-422
control data at 9600 baud. The communications wiring is the same
for all models of the Control Receivers.
•
Model CTX-800 Transmitter
•
Model JAD-832 Joystick Controller
•
Model JPD-101 Joystick Controller
•
CATS Video Switcher
•
MUX-05 Multiplexer (required for multiple JAD-832 control
stations)
•
CCU-100 Central Control Unit (required for multiple JPD-100
control stations)
Using the recommended cable, the maximum distance from the
control output port to the control receiver is 4000 feet. Models CRX-
501 and CRX-510 control one pan and tilt unit; Models CRX-502 and
CRX-520 control two pan and tilt units.
Data Output Port
CRX-500 Receiver
TX+
to
TB1, Terminal 1 (RX+)
TX-
to
TB1, Terminal 3 (RX-)
Shield
to
TB1, Terminal 2 (Shield)
Summary of Contents for CRX-501
