Installation manual
ULTRAFLEX
page 18
of 39
- ZTF SYSTEM
2 Insert the two ultrabolts (6) and (7) with washers (8) into the engine arm (9) up to half of their length.
NOTICE
The screws must protrude from the engine arm by around 15 mm (0,59").
3 Assemble the device with
bracket (1) on the engine arm (9).
CAUTION
Be careful not to bend, kink or dis-
connect hydraulic hoses.
4 Place washer (10) on the front
ultrabolt (6), which is the closest to
the device and tighten manually the
self-locking nut (11).
CAUTION
Apply grease to the screw shafts
before tightening the nuts.
9
8
7
6
1
9
6
10
11
0,69"
2 Insert the two ultrabolts (6) and (7) with washers (8) into the engine arm (9) up to half of their length.
NOTICE
The screws must protrude from the engine arm by around 15 mm (0,59").
3 Assemble the device with
bracket (1) on the engine arm (9).
CAUTION
Be careful not to bend, kink or dis-
connect hydraulic hoses.
4 Place washer (10) on the front
ultrabolt (6), which is the closest to
the device and tighten manually the
self-locking nut (11).
CAUTION
Apply grease to the screw shafts
before tightening the nuts.
9
8
7
6
1
9
6
10
11
0,69"
Summary of Contents for ND1-MM
Page 37: ...ZTF SYSTEM page 37 of 39 Installation manual ULTRAFLEX NOTES ...
Page 38: ...Installation manual ULTRAFLEX page 38 of 39 ZTF SYSTEM NOTES ...
Page 39: ...ZTF SYSTEM page 39 of 39 Installation manual ULTRAFLEX NOTES ...
Page 40: ...ULTRAFLEX S p A 16015 Casella Genova Italia Via Crose 2 ...
