Ultraflex ND1-MM, Installation Manual

Page: 17 / 40

ZTF SYSTEM
-
page 17
of 39
Installation manual
ULTRAFLEX
1 Fasten bracket (1) on device (2) using screws (3) and nuts (4) after having properly placed washers (5).
Lock using 2 18mm wrenches with a tightening torque of 80
Nm (59 lb.-ft.).
CAUTION
Apply grease to the screw shafts before tightening the nuts.
CAUTION
The bracket must be oriented as shown in the picture.
3.5 Installation with 150-175-200 HP Yamaha engines
The ZTF installation with 150-175-200 HP engines re-
quires the use of KIT QU1-Y (see also par. 2.2).
NECESSARY TOOLS
(2 x) Open end
wrench
18mm
Torque wrench MOLYKOTE
®
1000
KIT
QU1-Y
Open end wrench
9/16"
1
3
4
7 8
13
14
11
10
5
6
2
4
5
1
3
BOW
STERN
1 Fasten bracket (1) on device (2) using screws (3) and nuts (4) after having properly placed washers (5).
Lock using 2 18mm wrenches with a tightening torque of 80
Nm (59 lb.-ft.).
CAUTION
Apply grease to the screw shafts before tightening the nuts.
CAUTION
The bracket must be oriented as shown in the picture.
The ZTF installation with 150-175-200 HP engines re-
quires the use of KIT QU1-Y (see also par. 2.2).
NECESSARY TOOLS
(2 x) Open end
wrench
18mm
Torque wrench MOLYKOTE
®
1000
KIT
QU1-Y
Open end wrench
9/16"
1
3
4
7 8
13
14
11
10
5
6
2
4
5
1
3
BOW
STERN