SINGLE LEVER CONTROL B501 AND B502
-
page 13
of 63
Installation and maintenance manual
ULTRAFLEX
E
N
G
L
IS
H
3.8 Installation of the neutral safety switch
1
Put
the
lever
forward until the holes
on the plate (27) can
be seen through the
slot on the plate (26).
This optional device allows starting the engine only with the shift in neutral position, avoiding unexepected
movements of the boat.
To assemble it do as follows:
2
Position
the
device (30) on plate
(29) inserting the
cylinder (31) inside
the plastic guide
(32).
30
31
29
32
28
If you are installing the switch X12, the screw and the nut must be inserted inside the hole (A). For the switch
X43, the reference hole is (B).
3
Through the slot located on
the plate (28), insert the screw (33)
in the switch hole through the hole
of the plate (29).
Insert the nut (34) from the outer
side of the plate (29) and tighten
the screw (33).
NOTICE
28
29
33
34
A
B
26
27
