INSTALL GUIDE
PAGE 8
STEP 1:
With the ignition key in the
“Off”
position, within three seconds, turn
the ignition key to
“On”
position 3 times.
ON-OFF-ON-OFF-ON
NOTE:
Leave the key in the
“On”
position.
STEP 2: Press and release
the program button. The park lights will flash and
the horn (optional) will honk to confirm entering
program mode
.
STEP 3:
Select desired
Program Menu
See Quick view programming page 12.
The park lights will flash and horn (optional) will honk to confirm.
STEP 4:
Select
Programmable Setting
:
a) Press and Release
the Program Button the correct number of times to
select the desired
Programmable Setting
.
NOTE:
The LEDs will flash and the horn (optional) will honk the number of times
for the appropriate
Programmable Setting
that has been selected.
For example
: 1 flash/honk= Program Setting 1; 2 flashes/honks= Program
Setting 2; 3 flashes/honks= Setting 3; etc…
b) Press and Hold
the Program Button until the park lights flash and the
horn (optional) honks the appropriate number of times of the chosen
Option
in the
Programmable Setting
.
For example
: 1 flash/honk= Option 1; 2 flashes/honks= Option 2; 3 flashes/
honks= Setting 3; etc...
NOTE:
The
Program Menu
may be changed at any time by repeating
STEP 2
.
This will allow the installer to jump from one
Menu
, then quickly jump to
another
Menu
and change another
Programmable Setting
without
re-entering
Program Mode
.
To Exit
: Turning the ignition key to the “Off” position or 30 seconds of no activity.
This will be confirmed with a light flash and a long horn (optional) honk.
Press and
Release the
Program Button
For Menu 3,
press the
button
For Menu 1,
press the
button
For Menu 4,
press the
button
For Menu 2,
press the
button
Entering Program Mode
Ignition 3x
On/Off
On/Off On
