INSTALL GUIDE
PAGE 14
Menu 3
Press and
Release the
button for
Menu 3
Ignition 3x
On/Off
On/Off On
Press and
Release the
Program
Button
Press and Release
the Program Button
Number of Times for
Setting Chosen
Press and Hold
the Program Button
to Change Option
Setting 1 Gas/ Diesel Modes
(12 pin auxiliary connector pin 1)
1) Gas/ (+)Input 1 Flash/Honk 2 sec Gas mode, (+) Glow plug input (max 30sec.).
2) (-) Input 2 Flashes/Honks (-) Glow plug input (max 30 sec.)
3) Time Delay 3 Flashes/Honks 15 second delay before remote start.
Press & Release the Program Button 1 Time
(Setting 1) Confirmed with 1 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 2 Run Time
1) 15 Minutes 1 Flash/Honk Runs for approx. 15 minutes when activated.
2) 4 Minutes 2 Flashes/Honks Runs for approx. 4 minutes when activated.
2) 45 Minutes 3 Flashes/Honks Runs for approx. 45 minutes when activated.
Press & Release the Program Button 2 Times
(Setting 2) Confirmed with 2 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 3 Maximum Crank Time
1) 5 Seconds 1 Flash/Honk 5 sec max time that the starter will stay engaged.
2) 10 Seconds 2 Flashes/Honks 10 sec max time that the starter will stay engaged.
3) 3 Seconds 3 Flashes/Honks 3 sec max time that the starter will stay engaged.
Press & Release the Program Button 3 Times
(Setting 3) Confirmed with 3 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
