INSTALL GUIDE
PAGE 12
Menu 2
Press and
Release the
button for
Menu 2
Ignition 3x
On/Off
On/Off On
Press and
Release the
Program
Button
Press and Release
the Program Button
# of Times for
Setting Chosen
Press and Hold
the Program Button
to Change Option
Setting 1 Selectable Output
(6 pin main connector pin 5)
1) Ignition 2 1 Flash/Honk 2nd Ignition Output
2) Starter 2 2 Flashes/Honks 2nd Starter Output
3) Accessory 2 3 Flashes/Honks 2nd Accessory Output
Press & Release the Program Button 1 Time
(Setting 1) Confirmed with 1 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 2 Re-arm/ Aux output
(12 pin auxiliary connector pin 8)
1) Re-arm 1 Flash/Honk (-) 250ma Re-arm output.
2) Starter 2 Flashes/Honks (-) 250ma Starter output.
Press & Release the Program Button 2 Times (Setting 2)
Confirmed with 2 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 3 Re-arm Output
(12 pin auxiliary connector pin 8)
1) Type 1 1 Flash/Honk Re-arm pulse after start/ shutdown and with Lock.
2) Type 2 2 Flashes/Honks Re-arm pulse after start and with lock.
3) Type 3 3 Flashes/Honks Re-arm pulse after start only.
Press & Release the Program Button 3 Times (Setting 3)
Confirmed with 3 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Press & Release the Program Button 4 Times (Setting 4)
Confirmed with 4 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 5 Disarm/ Aux. 3
(12 pin auxiliary connector pin 10)
1) Disarm Output 1 Flash/Honk (-) 250ma output before remote start/ unlock.
2) Dome light Supervision 2 Flashes/Honks (-) 250ma output with unlock button (30 sec.).
Press & Release the Program Button 5 Times (Setting 5)
Confirmed with 5 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
continue page 18...
Setting 4 Trunk/ Aux. 2
(12 pin auxiliary connector pin 9) HOLD #.
1) Trunk Output 1 Flash/Honk (-) 250ma output when # held 5 sec.
2) Defrost Output 2 Flashes/Honks (-) 250ma pulse output after start.
3) Auxiliary 1 Output 3 Flashes/Honks (-) 250ma output with no disarm/unlock.
4) Car Finder 4 Flashes/Honks (-) 250ma pulsed horn output when # held 5 sec.
