PAGE 13
INSTALL GUIDE
Setting 6 Negative Park Light/ GWR
(12 pin auxiliary connector pin 11)
1) Negative Park Light Output 1 Flash/Honk (-) 250ma output with lock.
2) GWR/ Anti-Grind Output 2 Flashes/Honks (-) 250ma output while remote starter active.
Press & Release the Program Button 6 Times (Setting 6)
Confirmed with 6 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 7 Parking Light Output
(12 pin auxiliary connector pins 5)
1) Park Lights 1 Flash/Honk Normal Park Light Flashes
2) 30 sec. Output 2 Flashes/Honks Park Light output active 30 seconds with UNLOCK.
Press & Release the Program Button 7 Times
(Setting 7) confirmed 7 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 8 Secure Valet Mode
(time required to set the system into Service Mode)
1
) Normal Valet 1 Flash/Honk Hold the Program Button for 10 seconds
2) Secure Valet 2 Flashes/Honks Hold the Program Button for 15 seconds
Press & Release the Program Button 8 Times
(Setting 8) confirmed 8 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Menu 2 -
continued...
