PAGE 15
INSTALL GUIDE
Setting 1* Tach/ Tachless
(12 pin auxiliary connector pin 7).
1) Tach 1 Flash/Honk Blue/White pin 7 Must be connected.
2) Tach-less 2 Flashes/Honks No connection Blue/White pin 7.
Press & Release the Program Button 1 Time
(Setting 1) Confirmed with 1 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 2 Tach Adjustment
.
1) Decrease 1 Flash/Honk Decrease Start output by 5%
2) Increase 2 Flashes/Honks Increase Start Output by 5%
Press & Release the Program Button 2 Times
(Setting 2) Confirmed with 2 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 3 Over-Crank Adjustment.
1) None 1 Flash/Honk No over-crank adjustment.
2) .250 adjustment 2 Flashes/Honks 250ms over-crank adjustment.
3) .500 adjustment 3 Flashes/Honks 500ms over-crank adjustment.
Press & Release the Program Button 3 Time
(Setting 3) Confirmed with 3 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 4 Tach Wait.
1) None 1 Flash/Honk No Tach wait.
2) 500 seconds 2 Flashes/Honks 500ms Tach wait..
3) 1.5 seconds 3 Flashes/Honks 1.500 seconds Tach wait
Press & Release the Program Button 4 Time
(Setting 4) Confirmed with 4 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button
to proceed to the next step.
*Future Program Setting
.
Menu 4
Ignition 3x
On/Off
On/Off On
Press and
Release the
Program
Button
Press and
Release the
button for
Menu 4
Press and Release
the Program Button
# of Times for
Setting Chosen
Press and Hold
the Program Button
to Change Option
