ALARM CONNECTORS
SYSTEM PROGRAMMING -
Menu 1
PAGE 6
650 SERIES
INSTALL MANUAL
SYSTEM WIRING
SYSTEM PROGRAMMING -
Menu 1
PAGE 7
650 SERIES
INSTALL MANUAL
SYSTEM WIRING
PIN 3
BLUE
PIN 2
RED
PIN 1
GREEN
(-) OUTPUT WHEN THE UNLOCK IS PRESSED FOR 1 SECOND.
(+) OUTPUT FOR VOLTAGE INVERTER ONLY.
(-) OUTPUT WHEN THE LOCK IS PRESSED FOR ONE SECOND.
Pin 1- Pink Wire-
Auxiliary Channel 3 (-250ma Output)
Pin 5- Black/White Wire-
Dome Light/ Auxiliary 5 Output (-250ma Output)
Pin 2- White/ Blue Wire-
Horn/Auxiliary Channel 4 (-250ma Output)
Pin 3- Grey Wire-
Trunk Release (-250ma Output)
Pin 1- White-
Park Light Input (+ or -) (See page 4)
Pin 5- White-
Park Light Output (+ or -) (See Page 4)
Pin 2- Brown-
Siren Output (+)
Pin 3- Red-
Constant 12volt Input
Pin 4- Black-
System Ground Input (-)
Pin 4- Orange Wire-
Ground When Armed (-250ma Output)
Pin 7- Green Wire-
Negative Door Pin Input (-)
Pin 8- Blue Wire-
Hood Switch / Disconnect Circuit input (-)
Pin 9- Yellow Wire-
Switched Ignition Input (+)
Pin 6- Purple Wire-
Positive Door Pin Input (+)
Pin 10- White/Green Wire-
2nd Unlock/ Active When Disarmed Output
Pin 1- Green Wire-
Negative Lock Output
(-250ma Output)
Pin 2- 12volt Output for Door Lock Module
Pin 3- Blue Wire-
Negative Unlock Output
(-250ma Output)
Pin 1- Brown Wire-
Starter Disable Relay.
Pin 2- Brown Wire-
Starter Disable Relay.
PIN 9
YELLOW
PIN 8
BLUE
PIN 7
GREEN
(+) SWITCHED IGNITION INPUT. THIS WIRE MUST BE CONNECTED.
(-) SWITCH INPUT FOR HOOD OR TRUNK SWITCH.
(-) DOOR PIN SWITCH INPUT FOR DOOR PIN DETECTION.
PIN 6
PURPLE
PIN 5
BLACK/
WHITE
(+) DOOR PIN SWITCH INPUT FOR DOOR PIN DETECTION.
(-) OUTPUT FOR 30 SECONDS AFTER THE UNLOCK BUTTON IS PRESSED.
PIN 4
ORANGE
PIN 3
GRAY
PIN 2
WHITE/ BLUE
(-) CONTINUOS OUTPUT WHEN THE LOCK BUTTON IS PRESSED.
(-) OUTPUT WHEN THE UNLOCK BUTTON IS HELD FOR 3 SECONDS.
(-) OUTPUT FOR FACTORY HORN HONK ACTIVATION.
PIN 1
PINK
(-) OUTPUT WHEN THE # BUTTON IS HELD FOR 3 SECONDS.
PIN 10
WHITE/
GREEN
(-) OUTPUT WHEN UNLOCK IS PRESSED TWICE WITHIN 3 SECONDS.
PIN 5
WHITE
OUTPUT FROM PARK LIGHT RELAY. (+) OR (-)
PIN 4
BLACK
PIN 3
RED
PIN 2
BROWN
SYSTEM GROUND INPUT. CONNECT TO CHASSIS GROUND.
SYSTEM 12VOLT SUPPLY. CONNECT TO CONSTANT 12 VOLT SOURCE.
OUTPUT FOR SIREN ACTIVATION. (+) 2AMP MAX.
PIN 1
WHITE
PARK LIGHT INPUT. CONNECT TO (+) FOR (+) OUTPUT OR (-) FOR (-) OUTPUT
PIN 2
BROWN
CUT THE STARTER WIRE AND CONNECT TO THE KEY SIDE.
PIN 1
BROWN
CUT THE STARTER WIRE AND CONNECT TO THE MOTOR SIDE.
