Model APS-2K4MS
Programming Guide
The APS-800/875 Models have a configurable receiver that
allows the transmitter to be programmed to operate the Lock
Unlock functions with one transmitter button or with two transmitter
buttons (separate Lock/Unlock). In addition, the receiver also allows
driver priority function. This driver priority function takes place
when ever a particular transmitter is used to unlock the vehicle
regardless of the selection of one button or two button operation.
The following indicates the receiver programmable slots.
1
Lock/Unlock or Lock
2
Unlock if Programmed
3
Trunk Release & or Remote Start (Optional)
4
Auxiliary Output
5
Auxiliary Output
6
Driver 1 Priority or Separate Output
7
Driver 2 Priority or Separate Output
Receiver channels 6 or 7 will accept the programming of transmitter
channel 1 if used as the Lock/Unlock button, or Channel 2 when
separate Lock Unlock buttons are programmed. In this way, whenever
the transmitter is used to unlock the vehicle, channel 6 or 7, when
programmed, will provide a pulsed ground output. This output can be
connecter to the driver priority function of the vehicle to reset preset
user features. Please consult with your installation centers technician
to see if this feature is available in your vehicle.
Note: A total of 4 transmitters may be programmed into any receiver
channel.
Force programming a transmitter, removing a transmitter or reprioritizing
a transmitter is covered later in this manual.
Also, if you do not program a transmitter button into channel 2 which is
the separate unlock/disarm channel, then whatever button is
programmed into channel 1 will serve as both lock/arm & unlock/disarm.
