One-Way Alarm, remote keyless entry and engine disable system
User Guide
Table of Contents
Introduction............................................................................ 1
Transmitter Functions............................................................ 1
Remote Control Operation..................................................... 1
Panic Mode ........................................................................... 1
Temporary Chirp Delete ........................................................ 1
Alarm Functions..................................................................... 1
Passive Arming Mode............................................................ 2
Active Arming Mode .............................................................. 2
Disarming and Unlocking the Doors in Passive Arming Mode 2
Starter Kill.............................................................................. 2
To Arm the Starter Kill ........................................................... 2
To Disarm the Starter Kill....................................................... 2
System L.E.D Flash Rate ...................................................... 2
Alarm Valet Operation ........................................................... 2
Enabling Alarm Valet Mode ................................................... 2
Disabling Alarm Valet Mode .................................................. 3
Remote Valet Operation ........................................................ 3
Multi-Car Operation ............................................................... 3
Second vehicle control:.......................................................... 3
Diagnostics - Parking Lights Flash Rate ................................ 3
Introduction
This module is a state-of-the-art alarm; remote keyless entry
and engine disable system. With many an advanced function,
this product will satisfy any one of the user’s expectations
from high-end commodity and safety systems, without
neglecting the standard features commonly offered by entry-
level products.
Transmitter Functions
Remote Control Operation
BUTTON
FUNCTION
LOCK
•
LOCK
the doors
•
ARM
the starter kill – unless the alarm valet is enabled
•
Dome light
OFF
UNLOCK
•
UNLOCK
the driver’s door
•
Disarm the starter kill (rearm timer 60 sec.) – unless the alarm valet is enabled
•
Dome light
ON
for 60 sec., or until
IGNITION
ON
or
LOCK
button is pressed
LOCK
or
UNLOCK
with siren sounding
•
Siren mute, the module is not disarmed. (A 2
nd
press of the
UNLOCK
is required to disarm the module.)
UNLOCK
2 times
•
UNLOCK
all doors
AUX2
•
AUX
2
output, or 5 chirps if car finder is configured
LOCK
for 4 seconds
•
LOCK
the doors
•
Enter panic mode – siren triggered for 60 sec. (alarm valet is switched off)
UNLOCK
for 4 sec.
•
UNLOCK
the doors
•
Enter panic mode – siren triggered for 60 sec. (alarm valet is switched off)
TRUNK
for 4 sec.
•
One-sec
AUX
1
pulse (in trunk mode) or
AUX
1
toggled to
ON
/
OFF
(in latched mode)
LOCK
+
UNLOCK
for 4 sec.
•
Alarm valet switched
ON
(1 chirp) or
OFF
(2 chirps)
LOCK
+
AUX
•
Activates the
AUX
3
output
Panic Mode
Panic mode is used in emergency situations: this will disable the alarm valet, lock all doors and trigger the siren for 1 minute. Panic mode
is activated by
pressing the
LOCK
button for approximately 4 sec.
until the siren starts to sound and the parking lights begin to flash.
Temporary Chirp Delete
If you want to
avoid the siren chirps
in a quiet neighbourhood when arming or disarming the module,
press the
TRUNK
button
until the
parking lights flash. Then, within 3 seconds, press the
LOCK
button
to arm or disarm the module without siren chirps.
Note:
your installer
can permanently disable the chirp at installation.
Alarm Functions
(Note: the siren and shock sensor are optional.) Your installer can program your alarm in passive arming mode (so that the module
automatically arms when you leave the vehicle) or in active arming mode (this leaves the user the initiative of arming or disarming the
DOC. : 1.00
– Tl CA –
March 14, 2005
Manufactured in Canada
