SYSTEM PROGRAMMING -
Menu 1
Applicated Security Technologies, Inc. ("AST") promises to the original purchaser to repair or replace with
a comparable reconditioned model any AST control module ("module") excluding without limitation the any
other accessories, including but not limited to the antenna, remote, siren and wiring harness, proves to be
defective in workmanship or material under reasonable use during the lifetime of the vehicle it was
originally installed, provided the following conditions have been met: the module was professionally
installed and serviced by an authorized AST dealer; the unit will be professionally reinstalled in the vehicle
in which it was originally installed by an authorized AST dealer; the warranty information card was sent to
AST within 10 days of the original installation date. Any warranty returns include a warranty return
authorization number issued by AST, original bill or sale and be pre-paid shipped directly to AST. After an
initial period of 2 years from the date of installation, AST reserves the right, at its sole discretion, to charge
a warranty processing fee of $30.00 USD. AST does not cover the cost for return freight on warranty
items, this cost is the sole responsibility of the purchaser.
All components included with the original packaged unit other than the module, including but not limited to
the siren, antenna and the remote transmitters, carry a one-year warranty from the date of purchase of the
same. Any warranty returns on components must include a warranty return authorization number issued
by AST, original bill or sale and be pre-paid shipped directly to AST. This warranty is non-transferable and
is automatically void if: the original purchaser has not completed the warranty card and mailed it within ten
(10) days of the date of purchase to the address listed on the card; the unit's date code or serial number is
defaced, missing or altered; the unit has been modified or used in a manner contrary to its intended
purpose; the unit has been damaged by accident, unreasonable use, neglect, improper service,
installation or other causes not arising out of defects in materials or construction. The warranty does not
cover damage to the unit caused by installation or removal of the unit. AST, at its sole discretion, will
determine what constitutes excessive damage and may refuse the return of any unit with excessive
damage, including, but not limited to, overloading, moisture and physical damage.
To the maximum extent allowed by law, any and all warranties are excluded by the manufacturer and each
entity participating in the stream of commerce therewith. This exclusion includes but is not limited to, the
exclusion of any and all warranty of merchantability and/or any and all warranty of fitness for a particular
purpose and/or any and all warranty of non-infringement or patents, in the United States of America and/or
abroad. Neither the manufacturer or any entities connected therewith shall be responsible or liable for any
damages whatsoever, including but not limited to, any consequential damages, incidental damages,
damages for loss of time, loss of earnings, commercial loss, loss of economic opportunity and the like.
Notwithstanding the above, manufacturer does offer a limited warranty to replace or repair the control
module as describe above.
Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation
on how long an implied warranty will last or the exclusion or limitation of incidental or consequential
damages. This warranty gives you specific legal rights, and you may also have other rights, which vary
State to State.
SYSTEM PROGRAMMING -
Menu 1
PAGE 18
450 SERIES
INSTALL MANUAL
INSTALLER NOTES
SYSTEM PROGRAMMING -
Menu 1
PAGE 19
450 SERIES
INSTALL MANUAL
WARRANTY
SETTING #
LED FLASHES
1
2
3
VALET
SETTINGS
TRUNK RELEASE
SECURE VALET
15 SECONDS
STANDARD VALET
8 SECONDS
OPTION 3
3 CHIRPS
OPTION 1
1 CHIRP
OPTION 2
2 CHIRPS
PARK LIGHT
OUTPUT
AUX OUTPUT
AUX CHANNEL 5
OPTIONS
STARTER DISABLE
DOOR LOCKS
30 SECOND ON
FOR DISARM
0.75 SEC
PULSED OUTPUT
POS TRUNK
RELEASE OUTPUT
LATCHED
IGNITION ON RESET
NORMAL
OPERATION
ACTIVE WHILE
BUTTON HELD
SETTING
DESCRIPTION
SETTING #
LED FLASHES
1
2
3
4
5
6
7
IGNITION
AUTO-LOCK
AUTO-LOCK &
UNLOCK ENABLED
IGNITION AUTO-
LOCK ONLY
OPTION 3
3 CHIRPS
IGNITION AUTO-
LOCK DISABLED
OPTION 1
1 CHIRP
OPTION 2
2 CHIRPS
SIREN SETTINGS
DOOR LOCK
OPTIONS
DOOR LOCK
PULSE TIMES
SHOCK SENSOR
SETTINGS
PASSIVE ARMING
PASSIVE
DOOR LOCKS
SIREN CHIRPS
DISABLED
DOUBLE UNLOCK /
SINGLE LOCK
PULSES
0.25 SECOND
PULSES
SENSOR DISABLED
FULL
PASSIVE ARMING
PASSIVE DOOR
LOCKS
DISABLED
SIREN CHIRPS
ENABLED
DOUBLE LOCK /
SINGLE UNLOCK
PULSES
3 SECOND
PULSES
SENSOR ENABLED
PASSIVE SAFETY
REARM ONLY
PASSIVE DOOR
LOCKS
ENABLED
SIREN CHIRPS
ENABLED
SINGLE UNLOCK /
SINGLE LOCK
0.75 SECOND
PULSES
ALL PASSIVE
ARMING
DISABLED
SETTING
DESCRIPTION
PROGRAM MODE 1
PROGRAM MODE 2
INSTALLER PROGRAM OPTION CHART -
PLACE A CHECK MARK BY THE OPTION PROGRAMMED
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
OPTIONAL FEATURES INSTALLED
After checking off the programmed options and optional features, please provide a copy of this
page to customer for reference and keep a copy with customer file for future reference
NOTES:
