Cycle the Ignition Key
ON/OFF ON/OFF ON
(Leaving the key ON)
Press and release the
Program Switch 1 time.
Siren will chip to confirm
program mode entered
Press Unlock Button on
Remote to Select Menu 2
1 CHIRP
SETS OPTION 1 – SECURE VALET -
The LED/ Program Switch must
be held for 15 seconds to place the system into Valet Mode.
SETS OPTION 2 – STANDARD VALET-
The LED/ Program Switch must be
held for 5 seconds to place the system into Valet Mode.
SETS OPTION 1 – 30 SECOND-
The park light output will flash for all
functions and will stay active for 30 seconds when unlock is pressed.
SETS OPTION 2 –
Trunk Release-
The park light output will act as a
positive trunk output. The trunk output acts as a negative park light.
SETS OPTION 3 – Normal Operation-
The park lights will flash for all
alarm functions.
CHANGE SETTING 1 -
GOTO SETTING 2 -
PRESS & RELEASE THE VALET SWITCH
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
CHANGE SETTING 2 -
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO SETTING 3 -
PRESS & RELEASE THE VALET SWITCH
1 CHIRP
1 CHIRP
2 CHIRP
2 CHIRP
3 CHIRP
DEFAULT SETTING
DEFAULT SETTING
STEP 2 - SELECT / CHANGE PROGRAM SETTINGS
SETS OPTION 1 – Pulsed Output-
The channel 3 output will pulse for .75 seconds
when activated.
SETS OPTION 2 –
Latched Output-
The channel 3 output will latch on when activated.
Turning the ignition on will cancel the latch.
SETS OPTION 3 –
Active Output- The channel 3 output will stay on as long as the
button is held for a maximum of 5 seconds.
CHANGE SETTING 2 -
PRESS & HOLD THE VALET SWITCH UNTIL THE SIREN CHIRP(S)
GOTO BACK TO SETTING 1 -
PRESS & RELEASE THE VALET SWITCH
1 CHIRP
2 CHIRP
3 CHIRP
STEP 1 - ENTER PROGRAM MODE - MENU 2
SETTING 1 - VALET SETTINGS
THE SIREN WILL CHIRP 1 TIME WHEN SETTING 1 IS SELECTED
PRESS
1 TIME
X1
1 CHIRP
SETTING 2 - PARKING LIGHT OUTPUT
THE SIREN WILL CHIRP 2 TIMES WHEN SETTING 2 IS SELECTED
PRESS
2 TIMES
X2
2 CHIRP
SETTING 3 - AUX CHANNEL OUTPUT
THE SIREN WILL CHIRP 3 TIMES WHEN SETTING 3 IS SELECTED
PRESS
3 TIMES
X3
3 CHIRP
DEFAULT SETTING
SHOCK SENSOR ADJUSTMENTS
3 CHIRPS
Press & HOLD Lock + Unlock buttons at the same time
Press & HOLD Lock + Unlock buttons at the same time
(NOTE: Shock Sensor Adjustment Mode has an auto time out of
8 seconds)
Each time the lock button is pressed and released the sensitivity will
decrease by 1 level.
This is confirmed by a series of park light flashes & Siren Chirps
1 Flash / Chirp is the least sensitive setting
10 Flashes / Chirps is the most sensitive setting
Each time the unlock button is pressed and released the sensitivity will
increase by 1 level.
This is confirmed by a series of park light flashes & Siren Chirps
1 Flash / Chirp is the least sensitive setting
10 Flashes / Chirps is the most sensitive setting
Continue to hold for 3-5 seconds Until Siren Chirps 3 times
(Note: System will Arm or Disarm via silent arming prior to
entering adjustment mode)
1 - ENTER SHOCK SENSOR ADJUSTMENT MODE
2 - ADJUSTING SENSOR
3 - EXITING SENSOR ADJUSTMENT MODE
+
+
FOR MORE DETAILED INFORMATION ON PROGRAMMING AND
WIRING DIAGRAMS, DOOR LOCK CONFIGURATION AND OTHER
INFORMATION, PLEASE VISIT
WWW.ULTRASTARTERS.COM/DIAGRAMS
SYSTEM PROGRAMMING -
Menu 1
PAGE 12
450 SERIES
INSTALL MANUAL
PROGRAMMING
SYSTEM PROGRAMMING -
Menu 1
PAGE 13
450 SERIES
INSTALL MANUAL
SHOCK SENSOR ADJUSTMENT
