background image

Wiring Descriptions

MAIN CONNECTOR (6pin)

         Pin                      Function                            

Description

1-YELLOW     Starter Output

 - 

This wire will test 0V in OFF, ACCESSORY and in

                                                                    the ON key positions. 12v during START ONLY.

2-GREEN        Heater/Acc Output

 - 

This wire will test 0V in the OFF and START

                                                                              key positions. 12-14V in the ACCESSORY
                                                                              and RUN key positions.

3-RED             12volt Input(30amp)

 

-

 

Supplies 12votls for the IGNITION, PARK

                                                                               LIGHT and SELECTABLE outputs.

4-RED             12volt Input(30amp)

 

Supplies 12 volts for ACCESSORY and        

                                                                              STARTER outputs.

5-BLUE           Ignition Output

 -

 

This wire will test 0V in the OFF and      

                                                                        ACCESSORY key positions.12V in the
                                                                        IGNITION, START and RUN positions.

6-WHITE         Selectable Output

 - 

O

utput for 2nd IGNITION, 2nd ACCESSORY 

                                                                            or 2nd STARTER.

AUXILIARY CONNECTOR (14pin)

         Pin                      Function                            

Description

1-YELLOW      Re-arm(-)

 - 

0.75 second pulse output when 

 

 is pressed and after

                                                          remote start shutdown.
                                                          Used for factory alarm re-arm. (Menu 3)

2-RED/

               

Trunk Release(-)

 -

 Programmable output. Hold 

  

 or 

 

 button

    

WHITE 

                                             

for 3 seconds, output will stay active 

                                                                          (max 5 seconds) or (-)park light.

3-BROWN        Dis-arm(-)

 - 

0.75 second pulse when 

 

 and is pressed and before

                                                         remote starter activation. Used for factory alarm dis-arm.

4-ORANGE      Ground When Running(-)

 - 

Output active during remote start.

                                  

/Starter Kill

                               Programmable Starter Kill. (Menu 3)

5-WHITE/         Horn(-)

 -

 

Output to activate factory horn. (Menu 1&2)

    

BLUE

6-BLACK/        Parking Brake(-)

 - 

Input to detect (-) when parking brake switch

    WHITE             

                       

    

is applied. (“M” series)

7-PURPLE       Door Pin(+)

 

Input to detect 12v when door is open. (“M” series) 

8-WHITE          Park Light(+)

 - 

10amp positive output to activate park lights.

                                                                   Programmable output (menu 2)

INSTALL MANUAL   

                                                      REMOTE VEHICLE STARTER

      PAGE 8

Summary of Contents for 12xx Series

























Reviews: